top of page
Capricorn  צינור מקורי 1 מטר+ אביזרים
  • Creality Capricorn Bowden Tubing 1M, Bowden PTFE Tube for 1.75mm Filament with Teflon Tube Cutter, 2X PC4-M6 Extruder Fitting & 2X PC4-M10 Hotend Fitting for Ender 3 V2/3/3 Pro/5/CR-10/10S 3D Printer

  • Genuine Upgrades: Creality Capricorn XS Series Bowden PTFE tubing is the lowest friction premium tubing on the market with faster response, less retraction, and more accurate prints. There is less slippage, wear and tear on the extruder and less clogging when printing chunky filaments such as some wood fillers or iron fillers.
  • Compatible with More Filaments: This Bowden tube is reinforced with a proprietary blend of high-performance additives that can withstand higher temperatures than any other tubes, making it ideal for printing specialty filaments such as ABS, nylon, and polycarbonate. This PTFE tube XS tubing can keep working at temperatures up to 260°C.
  • Smoother Filament Output: Designed for 1.75mm filament, Creality Capricorn tubing has extremely accurate inner & outer diameters, and filament loads smoothly into the hotend with as little room for error as possible between the extruder and the hotend.
  • 1 Meter Tube with 2MM ID 4MM OD: Teflon tube length: 1 Meter, inner diameter: 1.95mm ± 0.05mm, outer diameter: 4mm. The optimal inner diameter size is designed to reduce "wiggle room" or flex in the tube, allowing you to print flexible filaments even on the longest Bowden systems.
  • Great Package: The package comes with two PC4-M6 fittings for the extruder and two PC4-M10 couplers for the hot end, its 2mm inner diameter is used for the Teflon tube with an outer diameter of 4mm. And a PTFE tube cutter that cuts both sides flat to prevent any failure or heat creeps during feeding and retraction. It includes everything you need to get started!

Capricorn צינור מקורי 1 מטר+ אביזרים

מק"ט: TA040724-10
₪ 95.00 מחיר רגיל
₪ 89.00מחיר מבצע

  • Our Premium XS Series Dark Blue Tubing
    Additives    Blue Color and Secret High Lubricity Additive Mixture
    Best For Chunky Filaments:YES
    Best For Flexible Filaments:YES
    Can See Through:NO
    Pulling Friction:0.8
    Color: Dark Blue
    Density (kg/m3):2300 +/-100
    Hardness:60-65
    Inner Diameter (mm)1.90 +/- 0.05
    Linear Thermal Expansion at 250 °C: 2.2-3.3%
    Material    Highest Quality Pure Virgin PTFE
    Melting Point (°C): up to 340
    Outer Diameter: 3.95 +/- 0.05
    Roundness (ϵ):< 0.1
    Stiffness: Medium High
    Thermal Conductivity (W/m-k)    0.25
    Wear Rate (gm/s):0.01
    Young's Modulus (GPa):0.53

Product Page: Stores_Product_Widget

מוצרים קשורים

bottom of page