Product Detail:
Textured PEI (no magnetic Base)
DO NOT USE ACETONE ON POWDER COATED PEI SIDE!!!
 
PEI must be used with the magnetic base. If you are going to buy a product without magnetic base, please make sure you already have a magnetic base.
 
Print Instructions:
When first time printing, keep the built sheet smoothing (the nozzle and the hot bed distance adjust to A4 paper thickness).
Tear off the adhesive on the base of the magnetic sticker and stick it on the hot bed platform, pay attention to be flat and do not leave air bubbles.
Adsorb the PEI side spring steel plate on the magnetic base.
 
We suggest the following printing temperatures:
 
PLA: 60℃
PETG: 70-80℃
ABS: 90-100℃
PEI sheet can work at 160°C~180°C for a long period of time, but PEI cannot exceed 200°C.
To remove the sheet from the printing surface, bend the sheet slightly. This will make it easier to take off the model.